The harder the wax the better with this mould.
I use Kerax 4600 for my snap bars and my finished bars with this mould measure approx 100mm x 60mm x 15mm and roughly 45-50g in weight. I have also tested this with a soft wax (rapeseed & coconut) but it is up to you to decide whether your wax is capable of managing fine detail, raised lines etc.
Please be aware that during busy periods dispatch may be 1 - 2 weeks.
We use a 3d printed template for this mould. We do our best to ensure a smooth surface but there may well be imperfections.
These moulds can be heated to temperatures up to 200 degrees although I personally recommend around 100 degrees. Warming your moulds can help give a smoother finish to your bars although some pitting can still occur
